home *** CD-ROM | disk | FTP | other *** search
- Path: fstgal00.tu-graz.ac.at!not-for-mail
- From: point@sbox.tu-graz.ac.at (Juergen Schober)
- Newsgroups: comp.sys.amiga.graphics
- Subject: Re: EGS/2410 default resolution modes
- Date: 16 Jan 1996 12:01:41 GMT
- Organization: Graz University of Technology, Austria
- Message-ID: <4dg435$7o0@fstgal00.tu-graz.ac.at>
- References: <philw-2712951307010001@philw.users.xplor.com> <2239.6579T572T1137@mindlink.bc.ca> <4d181l$btr@fstgal00.tu-graz.ac.at> <philw-1001961706110001@philw.users.xplor.com>
- NNTP-Posting-Host: freepass.tu-graz.ac.at
- X-Newsreader: TIN [UNIX 1.3 950824BETA PL0]
-
- P A Williamson (philw@xplor.com) wrote:
- : In article <4d181l$btr@fstgal00.tu-graz.ac.at>, point@sbox.tu-graz.ac.at
- : (Juergen Schober) wrote:
- :
- : <snip>
- :
- : I got my EGS/EGS2410 software going again. Everything looks fine now. I
- : also have noticed that Amosaic is working better with your new 2410 driver
- : (b17).
- : >
- : > running WB on EGSA2410 V2 at 1024x860x256 at 70 Hz !
- :
- : Can I run the 2410 at 800*600 at 70hz? I have a 60 hz screen now, a little
- : faster would be cool.:-)
-
- Yes, no Problem. Change the Clock on the board against one with a higher
- frequence. Normaly it should be about 48-52 MHz. Depends on how you program
- your timing...(usaly the 36 MHz is used for the 800x600).
-
-
- --
- --
- juergen schober * maker of the EGS A2410 Driver *
- a-graz, austria
- e-mail: juergen@point.adsp.sub.org - forget it !
- (f9031304@mbox.tu-graz.ac.at)
- point@sbox.tu-graz.ac.at
-
- running WB on EGSA2410 V2 at 1024x860x256 at 70 Hz !
-